Third Generation LED Front Running Light/TS Kit w/ Splitter for GT, GTS, Super, GTV

New and Improved LED Running Light and Turn Signal Kit for 2003 to 2014 VESPA GT/GTS/SUPER/GTV with Integral Power Plug Splitter. **NOTE** 2015 and Newer Model Year Scooters with ABS please buy OUR NEWER kit made for the ABS model GTS and GTV MI200-GTS.

See information at bottom of description for fitment on Vespa S, LX, or LXV. 

Add ultra-bright LED running lights and turn signals to the front of your scooter with this Scooter West exclusive! This kit is plug and play and can be installed in as little as 10 minutes. Watch the video below to see detailed installation instructions. IT'S REALLY EASY!!! This is our third generation of this kit. This version is simpler in its construction and more inexpensive than ever before. Equipped with super bright "cob-style" switch-back LED bulbs that are cool white during running light mode and ultra-bright yellow during turn signal function. The visibility that this kit will add to the front of your scooter must be seen in person to be appreciated. Additionally, we've incorporated a factory alarm plug connector pig-tail. The kit plugs into the factory alarm connector on the scooter and additional electrical accessories can plug into the pig-tail that's part of this kit. Extra LED is for the GTS speedo (not necessary for other models).

This upgrade fits all 2003 to 2014 of the following Vespas: -GT125 -GT200 -GTS125 -GTS250ie -GTS300ie -GTV250ie -GTV300ie -Super 250 -Super 300.

If you have a European or Asian model with two bulbs per turn signal, you will need to order the American turn signals as well, part numbers 638716 and 638715. If you have a 125 or 150cc Vespa S, LX, or LXV in ANY model year, please read the information below.

Previous versions of this kit were made to work on the Vespa S, LX and LXV. This kit WILL work for these models however the running lights may flicker at idle due to the lower output charging system found on these scooters. We're no longer advertising 100% compatibility for these models as a result of this occasional annoyance. Feel free to purchase and install this kit for these models of scooters. You will need a secondary WIRING ADAPTOR for carbureted applications.

Disclaimer-Electrical items are sold "as is" and cannot be returned or refunded under any circumstances. This may not be legal for on-street use in certain states and countries. Please check with your local authorities before purchasing.