Vespa S Top Case Backrest Pad - Black

Accessory back rest pad in black with grey piping to fit the Vespa S original top case.

The LX and Vespa S top cases unfortunately don't come with a back rest pad on them. But we have them for you in a variety of colors to match your seat color and material.

The top cases by themselves are hard and lumpy, so if you hate your passenger, leave it like it is. But we're guessing that's not the case (pun intended) and you'd rather have your passenger enjoy the ride! So, help them out with this backrest pad!

This pad is black, but we also have them in red and blue. See the related items below.

This back rest pad fits the original Vespa Top Cases for the following models:
-Vespa S50
-Vespa S125
-Vespa S150
-Vespa S125ie
-Vespa S150ie

It will also fit the original Vespa Top Cases for the following models, but likely won't match the seat unless you have a swapped seat from another model:
-LX50
-LX125
-LX150
-LX125ie
-LX150ie
-LXV 50
-LXV 125
-LXV 125ie
-LXV 150
-LXV 150ie

We've also had a few customers use these on Givi and other brands of top cases so the pad will match the seat.


Installation difficulty: - Easy with basic tools. Does require drilling two holes in the top case. Template provided. Includes all hardware necessary for installation.

TECH TIP - You will need to drill two small holes in your existing top case to mount this back rest pad. There is a template included that will show you exactly where to drill the two holes. Once you do that, it's just two simple phillips head screws to mount the pad to the case.

**Disclaimer** This is for the back rest pad only. Top case is not included.