Rear Hub Seal Vespa Smallframe, 59-71 Largeframe

Rear Hub Seal for All Smallframes and 1959-1971 Largeframes

Rear hub seal for the rear axle where it comes out of the case for all smallframes and 1959-1971 largeframes.

Inner Diameter – 27mm
Outer Diameter – 37mm
Thickness – 7mm

Alternate original part numbers for this part:
3/46699

See the related items below for similar seals needed and seal sets.

This seal fits:

-Vespa 50 Early (1963-1966) - V5A
-Vespa 50 (1967-1983) - V5A
-Vespa 50 Special (1969-1983) - V5B
-Vespa 50 Special (1974-1980) - V5B (USA)
-Vespa 50SS (1965-1971) - V5SS

-Vespa 90 Early (1963-1967) -V9A
-Vespa 90 (1967-1984) - V9A
-Vespa 90 (1974-1977) - V9A (USA)
-Vespa 90SS (1965-1971) - V9SS

-Vespa 100 (1978-1974) – V9B
-Vespa 100 Sport (1980-1981) - V9B (USA)
-Vespa 100 Sport (1978-1984) - V9B (Canada)

-Vespa 125 VMA1 (1966) - VMA1 (Sears Blue Badge)
-Vespa 125 Primavera (1967-1983) - VMA2
-Vespa 125 Primavera (1974-1977) - VMA2 (USA)
-Vespa 125 ET3 (1976-1983) – VMB

-Vespa VNA 125 (1957-1958) –VNA1
-Vespa VNA 125 (1958-1959) –VNA2
-Vespa VNB 125 (1959-1961) – VNB1
-Vespa VNB 125 (1961) – VNB2
-Vespa VNB 125 (1961-1962) – VNB3
-Vespa VNB 125 (1962-1963) – VNB4
-Vespa VNB 125 (1963-1964) – VNB5
-Vespa VNB 125 (1964-1966) – VNB6
-Vespa GT 125 (1961-1971) – VNL2
-Vespa GTR 125 (1968-1971) – VNL2

-Vespa VBA150 (1959-1960) - VBA
-Vespa VBB 150 (1960-1962) – VBB1
-Vespa VBB 150 (1962-1965) – VBB2
-Vespa Sprint 150 (1966) – VLB (Sears Blue Badge)
-Vespa Sprint 150 (1965-1971) – VLB
-Vespa Sprint Veloce 150 (1969-1971) – VLB

-Vespa Rally 180 (1968-1973) – VSD

-Allstate 788.94493 (1958)
-Allstate 788.94494 (1959-1960)
-Allstate 788.94495 (1961-1962)
-Allstate 788.94330 (1963)
-Allstate 788.94331 (1964)
-Allstate 788.94332 (1965)

Here at Scooterwest, we strive to bring you the highest quality seals available. Our seals are often Corteco or Rolf brand when available, if not they are the highest quality seals we can get our hands on. We take quality seriously because we believe that Vespas should have their integrity preserved with quality parts.

TECH TIP – We put a very thin layer of grease on the outer and inner lips of the seals to help install them safely and to help make a good seal. Remember to remove any woodruff keys prior to installation.