Rear Hub Seal 50's Handlebar Vespa

Rear Hub Seal for 50s Vespa Handlebar Scooters

Rear hub seal for 1950s Vespa Handlebar Scooters with exposed handlebars, not a solid cast handlebar. Also fits VB1.

Inner Diameter – 27mm
Outer Diameter – 42mm
Thickness – 10mm

Alternate original part numbers for this part:
118058
018104
002120
4/18106

See the related items below for similar seals needed and seal sets.

This part fits:

-Vespa 125 (1948-1950) – V1T-V15T
-Vespa 125 (1950-1952) – V30T-V33T
-Vespa 125 (1952-1953) - VM1
-Vespa 125 (1953-1954) – VM2
-Vespa 125 (1954-1955) - VN1
-Vespa 125 (1956-1957) – VN2

-Vespa 150 (1954-1955) - VL1
-Vespa 150 (1955-1956) – VL2
-Vespa 150 (1956-1957) - VL3
-Vespa VB1 150 (1957-1958) – VB1

-Allstate 788.100 (1951)
-Allstate 788.101 (1952)
-Allstate 788.102 (1952)
-Allstate 788.103 (1953)
-Allstate 788.104 (1954)
-Allstate 788.94490 (1955)
-Allstate 788.94491 (1956)
-Allstate 788.94492 (1957)

Here at Scooterwest, we strive to bring you the highest quality seals available. Our seals are often Corteco or Rolf brand when available, if not they are the highest quality seals we can get our hands on. We take quality seriously because we believe that Vespas should have their integrity preserved with quality parts.

TECH TIP – We put a very thin layer of grease on the outer and inner lips of the seals to help install them safely and to help make a good seal. Remember to remove any woodruff keys prior to installation.