LOWERING REAR SHOCK BRACKET KIT VESPA ALL YEARS GTS GTV HPE HPE2 GTS310

LOWERING REAR SHOCK BRACKET KIT FITS ALL YEARS VESPA GT200 GTS GTV HPE HPE2 GTS310

With this rear lowering bracket you can have both your feet on the ground!

• Lowering by approx. 1 inch (2cm)
• The rear shock absorber retains its full height and travel
• Heavy duty steel construction with stainless steel shock pin

The rear lowering bracket is mounted on the two rear shock absorbers. The rear shock absorber is loosened (not removed). On the right side, two new plates are mounted instead of the original shock absorber mount. On the left side, the suspension strut is lowered by means of an adapter. This lowers the scooter by about 1 inch, while the suspension strut retains its full working travel.

Note: The rear lowering fits only in conjunction with the original rear shock absorbers & exhaust. Some performance exhausts systems or shocks may hit the frame when combined with this bracket kit.
These do NOT fit with Bitubo or maybe other aftermarket shocks.

We recommend proper torque settings and loctite on all rear shock fasteners. 

Installation difficulty: - This install is very difficlut and you will need a good selection of tools. See our YouTube video (maybe watch it a few times).

TECH TIP - These are bolt-on and re-uses the original hardware for installation. You will need to loosen the rear shocks (you will not need to remove the shocks entirely). We have an install video that shows just how to do this.