LOWERED BLACK SEAT W/LATCH PLATE VESPA LX50 LX150 2006-2014

LOWERED BLACK SEAT WITH LATCH PLATE INCLUDED VESPA LX50/150 2006-2014

This seat will lower the Vespa LX by one inch and is also narrower to help with vertically challenged riders. Original Vespa part and includes seat latch plate. 

BLACK colored seat for the 50-150cc Vespa LX, Vespa S, or Vespa LXV. These seats will even fit the Vespa ET2 or Vespa ET4. Great for replacing an old worn out seat, or doing a color change on your Vespa 50-150cc.

Changing this seat out on any Vespa S, LX, LXV, or ET is very easy. It's just two easy accessible bolts for the seat and swap out the seat latch plate on top of the gas tank.

You will need to re-use your old hardware, lock cylinder, and lock from your old seat (it's pretty easy to swap). There is a little C-shaped wire clip under the seat holding in your existing lock cylinder. Pull that clip out to release the old lock cylinder from the old seat, slide the lock cylinder into the new seat, and replace the wire clip. Do not lose the wire clip, we can't get replacements. 

These are Indian Market seats and may have small blemishes or nicks due to transit and manufacturing quality.  Sold as IS

This seat fits 2001-2014:
--Vespa LX50
--Vespa LX150
--Vespa LX150ie
--Vespa S50
--Vespa S150
--Vespa S150ie
--Vespa LXV50
--Vespa LXV150
--Vespa LXV150ie (2010-2016)
--Vespa ET2 (Lock is on the other side)
--Vespa ET4 (Lock is on the other side)