SWING ARM (REAR SHOCK MOUNT) PULLER TOOL FOR THE VESPA GT/GTS/GTV (ALL YEARS)

SWING ARM AND REAR SHOCK MOUNT PULLER FOR GT/GTS/GTV

Swing arm puller. Heavy duty made from a 3/8 inch oil treated steel plate (almost 1/2 inch thick). 

This is your best chance for removing stubborn swing arms so you can change the rear tire. Many times the swing arm will be so tight on there it will be next to impossible to remove it by hand. This is were these tools are a must have.

Fits: Vespa GT, GTS, GTV, GT60,Super 300 and some Piaggio/Aprilia Scooters.

**Disclaimer**

• Due to some weather conditions and maintenance neglect we have found that a small percent of swing arms are impossible to remove. If you end up with one of these swing arms this tool will not remove it and you will have to resort to taking into a shop to be removed.
• This tool cannot be returned or refunded under any circumstances and has no warranty. 
• Make sure to grease or apply some Anti-seize to the rear axle and bearing before you reassemble the swing arm.