Cuppini Rear Topcase Flat Rack Vespa Primavera/Sprint

Cuppini Primavera and Sprint Flat Rear Rack w/Grab Rail For Top Cases. 

A rear rack with integrated hand rail for all 2015 and newer Vespa Primavera and Sprint 50cc to 150cc models. This is a flat rear rack that will accept most top cases like the Givi and Shad branded cases (But not the original Vespa topcases). This rack will also serve as a standalone flat rack for putting camping gear, a spare gas tank for touring, a SURF RACK!, or just using it for every day needs. Every scooter needs more storage space and this rack is your starting place.

This la carte flat rack will replace the stock handrail and re-use the existing hardware and chrome cover for the lower bolts. Instructions for mounting are included. No extra hardware is required to mount this rack. Givi and Shad cases come with their own mounting hardware to fit on this rack.

Cuppini was established by two brothers Giancarlo and Renato Cuppini in 1954. They were both HUGE Vespa fans and wanted to make accessories for their own Vespas. After there friends saw their cool accessories they wanted them too and voila, a scooter accessory company was born.

Over 50 years of accessory experience goes into manufacturing stylish Chrome Accessories for legendary Vespa Scooters.

This Flat Rack and Hand Rail fits:
-- Vespa Primavera 50 (2015 and newer)
-- Vespa Primavera 150 (2015 and newer)
-- Vespa Sprint 50 (2015 and newer)
-- Vespa Sprint 150 (2015 and newer)


Installation difficulty: - Just 4 bolts, but you will need some bending to line up all 4 holes. Check that rack will match up to the 4 mounting points, bend by hand to line up to all the bolt holes. You can also drill out the holes in the rack bigger as a last resort. 

Please note that the original chrome Vespa cover (on Primavera and Sprint ) for the the original grab rail will not fit with this rack (unless modified). Also this rack will NOT accommodate the original Vespa top cases. 

TECH TIP - You will need a T30 Torx, 5mm Allen wrench, and Philips head screw driver to install this rack.