Stator Plate for VINTAGE VESPA P200E 1980-81 USA Models (Red-Yellow Wire) (163910)

Original Piaggio stator plate for the vintage P200E USA model from 1980-1981

Fits some late model year 1979 as well. These are the single yellow wire stator plates. PLUG AND PLAY!

These have all the correct wires to the harness and CDI, but you will need to hook up the gray wire to the purple wire on your harness. there is a small piece of purple sheathing on his wire.  

INSTRUCTIONS FOR MAKING "186147" WORK ON A DOUBLE YELLOW WIRE (EARLIER ELECTRICAL SYSTEM)

1- Attach yellow from stator to either yellow from main harness (at junction box)
2- Attach red to from stator to either yellow from main harness (at junction box)
3- Install "reg12vac" parallel w/ ground to purple/gray wire at junction box.
3a- Attach yellow wire on regulator to purple/gray wire on stator and to purple wire in main harness.
3b- Install brown wire on regulator to black wire from stator and to black wire in main harness.
4- Install all other wires as per usual.
5- Install red, white, and green wires to stator as per usual.