If you're looking for a nice chrome rear rack for an LX that's also functional and easy to install, then this chrome rear rack from Faco is a good fit. It bolts on to a stock LX hand-rail and includes the hardware.
Manufacturing in Italy, Faco is the premier chrome accessory company for scooters.
NOTE: This rack does NOT fit if you have the original Vespa or Logo Brand rear crash bars (LX12P-LX12PA) installed on your scooter.
This will NOT fit the Vespa S unless you have the the LX rear hand rail.
See part number VS29PA for a flat rack that will work with the Vespa S or on an LX with the Logo rear bars.(622714-623572)
The chrome Vespa badge plate will NOT fit with this rack installed.
All the hardware you'll need in order to complete your installation is included. This rack bolts to the Factory grab rail. ABSOLUTELY no drilling is required.
**Installation Note** The mounting bosses in the factory grab rail are concealed by those two chrome caps.
1-Remove the chrome caps and discard them.
2-Remove the chrome Vespa cover.
3-If available, run a 6 x 1.00mm tap through the threaded bosses so you can remove any residual chroming slag or debris.
4-If you don't have a tap you can work one of the mounting bolts back and forth until it threads in smoothly.
5-Lift rack into place and loosely install all fasteners.
6-It's not uncommon to have to push and pull the rack a bit in order to get everything to line up. It has been shipped all the way from Italy afterall!
7-Tighten all the fasteners and enjoy.
Faco has been making quality chrome products for Vespas and all other makes of scooters for over 25 years. We've been proudly distributing their products since 1999.
click a link below to see all items of that type