LED Rear Turn Signal Kit Vespa GTS/GTV/Super
Click the Image to See More
(Actual Item May Vary from Image)
Join the 21st Century and add bright, efficient LED bulbs to your scooter's turn signals.
**This is the ideal kit for the USA standard turn signal housings the use a larger BA15 base amber bulb. The newer turn signal assemblies have been coming from Vespa with a small inner amber lense. This kit may be difficult to install with that type of housing due to the interference of the bulbs with the inner lense.
This plug and play kit upgrades your rear turn signal bulbs to LED using the existing sockets. Simply attach the supplied resistor packs inline with the original wiring harness, plug in the supplied LED bulbs, and boom, you've got a modern lighting setup.
You can also use this kit to convert the front turn signals to LED bulbs (without running lights). To go for the complete extreme LED experiences get this kit GTSTURN-RR-LED and MI97-REAR to add rear running lights and GTSTURNKIT-LED kit for the front (which also includes running lights for the front).
This kit includes the following:
(2) Yellow LED Bulbs
(2) Resistor Packs (reverses the polarity to allow for LEDs, and regulates the flash rate to the correct speed.)
(2) Zip Ties (to tuck excess wiring out of sight)
Fits the following USA* Vespa models:
Super 300 (2009-2014)
These will work on 2015 and newer models and scooters outside of North America, but your turn signal assemblies will need to be modified.
You will need to remove the inner yellow bulb lens. This can be done by breaking out this yellow lens with a small pair of needle nose pliers. These pieces will need to be small enough to be removed through the bulb holder hole.
People Who Bought This Also Bought ....