GTS Power Plug In TAN Pair

Click an Image to See it BIGGER

(Actual Item May Vary from Image)

Ref. Number: GTSPOWERPLUGTN

$59.95

Bookmark:

Overview
More Information

TAN covers PAIR. Just plug and play with this ready to go power plug. Just one screw and plug it in and you'll be ready to charge your cell phone, PDA, Ipod, Game Boy, power a GPS or whatever you need to power with 12V (up to 5amp). Includes both plastic knee pads, rubber cap to cover it when not in use and all you need to hook up the POWER...This fits GTS250,GTV250, and GT60 (will not fit the SUPER 300 at this time). Does not fit on European ABS equipped models.

Item Properties

click a link below to see all items of that type

Manufacturer

Motorsport Scooters

Scooter Fit

	Vespa Super (250-300)
	Vespa GTS 250ie
	Vespa GTV (GT60)
	Vespa GT200

Item Type

Accessory

GTS-GTV POWER PLUG INSTALL

You will have to remove the horn cover to install the power plug, but it's an easy 10 step job everyone should be able to do.
(For safety reason please disconnected the battery before do anything electrical on your scooter)

1) Pry off the Piaggio badge.

2) Remove the screw for the horn cover.

3) Slide the horn cover up to remove it.

4) Unplug the horn cover light from the white plug and set the horn cover aside.

5) Remove the one screw for the glove box cover and remove the old cover.

6) Feed the power plug harness through to the horn cover side.

7) Pull the harness out on the front of the scooter.

8) Hook up the power plug wire into the original plug for the horn cover light.

9) Now plug the horn cover light into the power plug harness.

10)Re-install the horn cover and glove box cover with the power plug and hook up the battery. Test your new power plug for power. Keep in mind it's only powered when the scooter's ignition switch is in the on positions.

For safety reasons never plug anything over 5 amp draw.