Looking For Mobility Scooters? Get a mobility Scooter from MyOnlineMedicalSupplies.com!

GTS POWER PLUG




Click an Image to See it BIGGER

GTS POWER PLUG
(Actual Item May Vary from Image)
Ref. Number: GTSPOWERPLUG
$49.95

Just plug and play with this ready to go power plug. Just one screw and plug it in and you'll be ready to charge your cell phone, PDA, Ipod, Game Boy, power a GPS or whatever you need to power with 12V (up to 5amp). Includes plastic knee pad, rubber cap to cover it when not in use and all you need to hook up the POWER...This fits GTS250,GTV250, and GT60 (Will not work on the Super at this time, but check back with us). Does not fit on European ABS equipped models.

Item Properties

click a link below to see all items of that type

Manufacturer

Motorsport Scooters Motorsport Scooters

Scooter Fit


Item Type

Accessory Accessory

GTS-GTV POWER PLUG INSTALL

You will have to remove the horn cover to install the power plug, but it's an easy 10 step job everyone should be able to do.
(For safety reason please disconnected the battery before do anything electrical on your scooter)


1) Pry off the Piaggio badge.


2) Remove the screw for the horn cover.


3) Slide the horn cover up to remove it.


4) Unplug the horn cover light from the white plug and set the horn cover aside.


5) Remove the one screw for the glove box cover and remove the old cover.


6) Feed the power plug harness through to the horn cover side.


7) Pull the harness out on the front of the scooter.


8) Hook up the power plug wire into the original plug for the horn cover light.


9) Now plug the horn cover light into the power plug harness.

10)Re-install the horn cover and glove box cover with the power plug and hook up the battery. Test your new power plug for power. Keep in mind it's only powered when the scooter's ignition switch is in the on positions.

For safety reasons never plug anything over 5 amp draw.