ScooterWest.com Ships to Almost All Countries. After adding an item to the shopping cart you will be able to choose your country and shipping method.

YOUR SCOOTER(S)

1. Choose your scooter(s)

ET2 ET4 LT50 LT150 Sport Flyscreen CLEAR

Click the Image to See More

(Actual Item May Vary from Image)

Ref. Number: ET19CLEAR

$139.95

Item Description

Small Sport Windscreen in Clear for the Vespa ET2 and ET4, and also the Piaggio LT50 and LT150.

Our smaller sport windscreen for ET2 50cc and ET4 150cc models. This windshield will offer some wind protection for your chest, making your ride warmer, calmer, and more protected from bugs and flying debris. As an added bonus, a small or midsize windscreen is a good performance boost, adding a few mph to your top speed. It also offers wind protection as well as enhancing the visual lines of your Vespa.

Made right here in California and a great fit.

Includes all hardware and instructions necessary for mounting. This windscreen is about 7" above the top of the headlight and 20.5" wide.

Also available in TINTED/SMOKED.

This windscreen fits
-Vespa ET2
-Vespa ET4
-Piaggio LT50
-Piaggio LT150

Installation difficulty:

- Easy with basic tools. Purely bolt-on.

TECH TIP - Requires a 4mm allen wrench and an adjustable wrench for installation which are NOT included with this kit. Completely assemble the mounting brackets first. Then install the windscreen on the brackets, but leave the bolts loose enough so that you can adjust the brackets if necessary. Next, you will insert the assembled brackets into the two open holes under your handlebars. Once you have the screen situated properly, tighten down the large nuts at the bottom of the brackets. This will expand the expansion cylinders inside the holes in your handlebars, holding the whole screen in place. Finally make any up or down adjustments for the screen on the brackets and tighten down the bolts that hold the screen to the brackets. Voila! New windscreen! Go ride!