GTS FACO REAR CRASH BARS

You will need a 4mm allen wrench and 10mm wrench or adjustable wrench to install these bars.

Includes 2 bolts, (4 mm allen head), 2 nuts, 2 lock and 2 flat washers.

Remover both side panels, Left side and right side.

Remove both rear nuts.

Now remove both side panels like this.

You will have to remove both rear reflectors to fit these bars.

Bolt on this bracket (there are left and rights), this way only with the original Philips head screw.

Replace bolt side panels.

And now the rear bracket. Bolt on the rear with the original nuts, leave loose for now..

Bolt on the front bar, use 4mm allen head bolt and washers as shown, now tighten both front and rear nuts.

NOW ENJOY....