GTS 250ie Chrome rear crash bars. Easy to install, and adds a nice touch of Chrome to your GTS. Protect your investment from run away shopping carts, and wild car doors. Now fits without removing the rear reflectors, but it does touch the reflectors a little (note: not all reflectors on the USA Vespas are installed in the same place, so you may have to remove your rear reflectors to fit these bars). Fits GTS, GT60 and GTV.
FACO GT REAR BARS
GTS FACO
REAR CRASH BARS
You will need a 4mm allen wrench and 10mm wrench
or adjustable wrench to install these bars.
Includes 2 bolts, (4 mm allen head), 2 nuts,
2 lock and 2 flat washers.
Remover both side panels, Left side and right
side.
Remove both rear nuts.
Now remove both side panels like this.
You will have to remove both rear reflectors to fit these bars.
Bolt on this bracket (there are left and rights),
this way only with the original Philips head screw.
Replace bolt side panels.
And now the rear bracket. Bolt on the rear
with the original nuts, leave loose for now..
Bolt on the front bar, use 4mm allen head bolt and washers as
shown, now tighten both front and rear nuts.
NOW ENJOY....
