GT 200 Chrome rear crash bars. Easy to install and adds a nice touch of Chrome to your GT. Protect your investment from run away shopping carts and wild car doors. Fits with the rear USA reflectors.
FACO GT REAR BARS
GT FACO REAR CRASH BARS
Includes 4 bolts, (two 5 mm allen head and
two 6 mm allen head), 4 nuts, 4 lock, and 4 flat washers.
Remover both side panels, Left side and right
side
After you remover the 2 Philip head screws
and the side panel will pop off.
Now remove this Philip head screw.
And this one too.
Bolt on this bracket (there are left and rights),
this way only with the original Philips head screw.
And now the rear bracket and replace the side
panel with the 2 Philips head screws.
Bolt on the front bar, use 5mm allen head bolt and washers as
shown, leave loose for now.
Bolt on the rear with the 6mm head allen as so and now tighten
both front and rear bolts.
Repeat for the left hand side and your done, BUT BEFORE YOU RIDE MAKE SURE THE RIGHT SIDE RADIATOR
HOSE DOES NOT TOUCH THE BAR BRACKET WHEN OFF THE CENTER STAND.
IF THEY DO, ZIP TIE THE HOSE AWAY FROM THE BAR BRACKET.
NOW ENJOY....
