TAN covers PAIR. Just plug and play with this ready to go power plug. Just one screw and plug it in and you'll be ready to charge your cell phone, PDA, Ipod, Game Boy, power a GPS or whatever you need to power with 12V (up to 5amp). Includes both plastic knee pads, rubber cap to cover it when not in use and all you need to hook up the POWER...This fits GTS250,GTV250, and GT60 (could fit Super, but will need another harness, please let us know if you have a Super). Does not fit on European ABS equipped models.
GTS-GTV POWER PLUG INSTALL
You will have to remove the horn cover to install
the power plug, but it's an easy 10 step job everyone should be
able to do.
(For safety reason please disconnected the battery before do anything
electrical on your scooter)
1) Pry off the Piaggio badge.
2) Remove the screw for the horn cover.
3) Slide the horn cover up to remove it.
4) Unplug the horn cover light from the white plug and set the
horn cover aside.
5) Remove the one screw for the glove box cover and remove the
old cover.
6) Feed the power plug harness through to the horn cover side.
7) Pull the harness out on the front of the scooter.
8) Hook up the power plug wire into the original plug for the
horn cover light.
9) Now plug the horn cover light into the power plug harness.
10)Re-install the horn cover and glove box cover with the power
plug and hook up the battery. Test your new power plug for power.
Keep in mind it's only powered when the scooter's ignition switch
is in the on positions.
For safety reasons never plug anything over 5 amp draw.
